White90GT
11-14-2007, 01:23 PM
OK, as most of you know, I'm finally getting a custom cam, appropriate springs, and freshening up the shortblock.
Here's the new setup, so what are your ET guesses.
408ci, 11:1 compression, cast eagle crank, eagle sir rods, probe dished pistons
Ported Canfield 192 heads, gasket matched to 1262R, flow 300/220@.700 lift
Ported Motorsport Vic Jr, ported through to 1262R and matches head ports perfect
Custom Buddy Rawls spec'd solid roller: 262/264@.050, .688 with 1.6 rocker on both int/exh, 110 lsa
Appropriate springs for said cam with titanium retainers and stud girdle
Holley 750 with 850 base, modified by PRC carbs (don't say put a dominator on it, not for a while LOL)
2" primary to 3.5" collector to 3" exhaust with ultraflos
Alt, w/p, and crank are the only accessories with a race pulley on crank
4200 rpm stall and t-brake
3.73 gear and 28" tires
3000 lbs race weight give or take 30-40 lbs
Previous best ET was 1.48 sixty, 6.67@103, 10.54@127 in high 70s/low 80s weather.
The previous cam was: 254/260, 621/627, 110 lsa
A couple of improvements are being made with the shortblock that should help out a bit.
The goal is 10.00, but that will probably be in perfect weather, so lets say 10.20s-10.30s in normal 80-90 degree weather.
Here's the new setup, so what are your ET guesses.
408ci, 11:1 compression, cast eagle crank, eagle sir rods, probe dished pistons
Ported Canfield 192 heads, gasket matched to 1262R, flow 300/220@.700 lift
Ported Motorsport Vic Jr, ported through to 1262R and matches head ports perfect
Custom Buddy Rawls spec'd solid roller: 262/264@.050, .688 with 1.6 rocker on both int/exh, 110 lsa
Appropriate springs for said cam with titanium retainers and stud girdle
Holley 750 with 850 base, modified by PRC carbs (don't say put a dominator on it, not for a while LOL)
2" primary to 3.5" collector to 3" exhaust with ultraflos
Alt, w/p, and crank are the only accessories with a race pulley on crank
4200 rpm stall and t-brake
3.73 gear and 28" tires
3000 lbs race weight give or take 30-40 lbs
Previous best ET was 1.48 sixty, 6.67@103, 10.54@127 in high 70s/low 80s weather.
The previous cam was: 254/260, 621/627, 110 lsa
A couple of improvements are being made with the shortblock that should help out a bit.
The goal is 10.00, but that will probably be in perfect weather, so lets say 10.20s-10.30s in normal 80-90 degree weather.