AN radiator hose...

[Saleen91]

What's the typical size AN fitting that people run for their radiator hose? Do most people only run AN/steel braided on the upper hose? and I could have sworn I saw somebody post that SOMEONE, somewhere, make's a pre-fab'd SBF thermostat housing with an AN fitting already "machined" (or welded) onto it...if so..WHO?

[HoustonLX]

I believe you are talking about this post..

http://www.pomoforacing.com/forums/showthread.php?t=7197

[TxBandit]

I'd use -16 hose and fittings. Yes most guys use steel braided hose. I have a plate, as I recall it has a -16 fitting welded on it. Let me know if you're interested.

Troy

[FE_rex]

I ran -16 braided hose on the Fairlane - worked good

[nintylx]

I used -20 B/C bigger is better!!!! :smokin:

[Saleen91]

I'd use -16 hose and fittings. Yes most guys use steel braided hose. I have a plate, as I recall it has a -16 fitting welded on it. Let me know if you're interested.

Troy

I'm interested. I'll trade you that pulley you want back for that fitting/plate. :)

[TxBandit]

I'm interested. I'll trade you that pulley you want back for that fitting/plate. :)

That sounds like a fair deal to me. Let me know when you want to get together.

Troy

[Saleen91]

I'll be available Saturday after I get out of class and all day Sunday.

[TxBandit]

I'll swing by Sunday. I have plans for Saturday.

Troy

[Saleen91]

cool