Fuel Injector Parts

[maveRick]

After a few attempts at locating a "Pintle Cap" (Top hat looking thingy) for a 24lb fuel injector, O'Riellys sells the individual caps included in a seal kit (Borg Warner PN 27-4081) for $2.49/ea.

A good reference link for hard-to-find injector parts is http://www.lindertech.com/injparts.htm .

http://www.lindertech.com/images/image045.jpg

Obviously, there are other suppliers but the site is a good starting point.

[Blue91]

Was it 34# specific, or is it for any ford (bosch) injector? I've always ASSUMED that they are interchangable, since the cap isn't the part that sprays more or less.

Just wondering, since you seemed to be looking for a 24# cap in your previous post.

[maveRick]

Originally posted by Blue91
Was it 34# specific, or is it for any ford (bosch) injector? I've always ASSUMED that they are interchangable, since the cap isn't the part that sprays more or less.

Just wondering, since you seemed to be looking for a 24# cap in your previous post.


It was 24# specific - different than 19's. The ends ARE slightly different between the two. :confused: