Speedn88Stang
07-27-2003, 06:45 PM
Looking to trade his set up for either semi built up AOD with stall and such or complete Tremec 3550 set up so the complete swap can be done. I may even consider a good T5 swap with all necessary parts.
fresh (3500 mile) C4 tranny with "H" servo, 3200 TCI stall and B&M flexplate in the car and would possibly be interested in swapping to a Tremmec setup or built AOD with stall. Everything to swap the C4 in for everything to swap the tremec/AOD/T5 in. If anyone is interested in a trade or partial trade let me know. I can throw in cash if need be for good Tremec 3550 or TKO set up.
It has "commercial" clutches in it and the H servo which is the one that a couple of the aftermarket people copied to make their billet servos. I think Art Carr is one of them. The shifter is the stock AOD shifter with modified linkage. It has that stealth factor there and you don't have to hack up the console to get that one in there.
The stall is a TCI unit. 3200 stall.
The flexplate is a B&M.
I have cash to go towards the trade. I'll either take a built up AOD or Tremec set up. I have reciepts for the trans rebuild/parts,stall and flexplate. All have 3500 miles on them and were done professionally. Everything was rebuilt and done for 1300 or so. So if interested to buy just make a reasonable offer. I know i wont get anywhere near that so make and offer and you may be suprised. If you have a trade i have cash to throw in your direction if need be.
If it is a T5 swap it will be an even trade. Let me know.
fresh (3500 mile) C4 tranny with "H" servo, 3200 TCI stall and B&M flexplate in the car and would possibly be interested in swapping to a Tremmec setup or built AOD with stall. Everything to swap the C4 in for everything to swap the tremec/AOD/T5 in. If anyone is interested in a trade or partial trade let me know. I can throw in cash if need be for good Tremec 3550 or TKO set up.
It has "commercial" clutches in it and the H servo which is the one that a couple of the aftermarket people copied to make their billet servos. I think Art Carr is one of them. The shifter is the stock AOD shifter with modified linkage. It has that stealth factor there and you don't have to hack up the console to get that one in there.
The stall is a TCI unit. 3200 stall.
The flexplate is a B&M.
I have cash to go towards the trade. I'll either take a built up AOD or Tremec set up. I have reciepts for the trans rebuild/parts,stall and flexplate. All have 3500 miles on them and were done professionally. Everything was rebuilt and done for 1300 or so. So if interested to buy just make a reasonable offer. I know i wont get anywhere near that so make and offer and you may be suprised. If you have a trade i have cash to throw in your direction if need be.
If it is a T5 swap it will be an even trade. Let me know.