Ranger50
01-28-2003, 09:52 AM
In an effort to keep ahead of some stooge who bought a Cartech Twin Turbo kit, I must sell a bunch of stuff to afford better/faster stuff.....
-Vortech R-trim kit (86-93 Mustang). I originally started off with just the main bracket and head unit and have everything but the tensioner for the blower belt. Currently have a set of cogs for it, but I will sell for less if you don't want them (They will produce 25psi at 6500rpm, according to my calcs I have available to me.). This has only been bolted up to my motor and NEVER been run! Everything on the table in the pic is what is included.
http://stangcrazy.com/ranger50/RangerPics/R-TrimKit.JPG
Installed in truck:
http://stangcrazy.com/ranger50/RangerPics/RTrimInTruck1.JPG
Price: $2000 or $1850 minus the cogs.
-Downs GT40 Box upper. BRAND new, no porting. Has some of the back coating polished off as I was trying to make it fit into my Ranger in the above picture. Does NOT effect performance at ALL. Great for a blower car or a high winding NA combo.
http://stangcrazy.com/ranger50/RangerPics/DownsUpper.JPG
http://stangcrazy.com/ranger50/RangerPics/DownsUpper1.JPG
Price: $330.
-99 Lightning 80mm MAF. Can be only used with a chip for a Mustang.
Price: $75.
-FMS 42# injectors, never fired. Can be seen below.
Price: $275.
-UPR Fuel Rails. Only been bolted up to the intake and injectors seated into it.
Price: $125.
*pic of rails and injectors:
http://stangcrazy.com/ranger50/RangerPics/DSC00023.JPG
All prices are PLUS shipping (UPS/USPS) and insurance from the 49343 zip code. I MAY take trades on some of the stuff, NO guarantees.
*DISCLAIMER* - ALL STUPID QUESTIONS WILL BE CHEERFULLY IGNORED!!!!!
Thanks for looking.
Brian
-Vortech R-trim kit (86-93 Mustang). I originally started off with just the main bracket and head unit and have everything but the tensioner for the blower belt. Currently have a set of cogs for it, but I will sell for less if you don't want them (They will produce 25psi at 6500rpm, according to my calcs I have available to me.). This has only been bolted up to my motor and NEVER been run! Everything on the table in the pic is what is included.
http://stangcrazy.com/ranger50/RangerPics/R-TrimKit.JPG
Installed in truck:
http://stangcrazy.com/ranger50/RangerPics/RTrimInTruck1.JPG
Price: $2000 or $1850 minus the cogs.
-Downs GT40 Box upper. BRAND new, no porting. Has some of the back coating polished off as I was trying to make it fit into my Ranger in the above picture. Does NOT effect performance at ALL. Great for a blower car or a high winding NA combo.
http://stangcrazy.com/ranger50/RangerPics/DownsUpper.JPG
http://stangcrazy.com/ranger50/RangerPics/DownsUpper1.JPG
Price: $330.
-99 Lightning 80mm MAF. Can be only used with a chip for a Mustang.
Price: $75.
-FMS 42# injectors, never fired. Can be seen below.
Price: $275.
-UPR Fuel Rails. Only been bolted up to the intake and injectors seated into it.
Price: $125.
*pic of rails and injectors:
http://stangcrazy.com/ranger50/RangerPics/DSC00023.JPG
All prices are PLUS shipping (UPS/USPS) and insurance from the 49343 zip code. I MAY take trades on some of the stuff, NO guarantees.
*DISCLAIMER* - ALL STUPID QUESTIONS WILL BE CHEERFULLY IGNORED!!!!!
Thanks for looking.
Brian