PDA

View Full Version : please buy these parts


rxracer
10-06-2009, 04:23 PM
all pics can be seen HERE (http://s220.photobucket.com/albums/dd188/32vfoxbird/Uploads%20via%20Pixelpipe/)

*80's 351W non-roller block
*bored, honed, mag'd, vat'd, balanced, new cam bearings, new freeze plugs, and oil gallery plugs by Harris Engine
*.030" over Speed Pro hyper flat top pistons (approx 9.5:1 CR with 61cc heads)
* ebay forged I-beam rods w/ arp bolts
* stock crank turned .010/.010
$800 or trade for a stock efi 87-92 302 oilpan to intake AND $400

*Comp Cams Magnum 292H hydro flat tappet cam
RPM Range: 2,500 to 6,500 rpm
Duration @ .050" lift: 244/244 (int/exh)
Valve lift: .534/.534 (int/exh)
*Comp Cams lifters
$100

*brand New Powerbond SFI 28oz balancer
$150

*ARP 1/2" head studs
$75

*Scat 28oz SFI flexplate for AOD/big bell C4
sold

*Fox/crown vic 351 oil pan w/ pickup and a couple of dipsticks with tubes
$60

*Fox 351 AC bracket
$60

*BRAND NEW polished Ford Racing SBF valve covers
$75


http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture101small.jpg
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/motor_bronze_small.jpg
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/oilpan_after.jpg
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture032small.jpg

BODY:
86 GT front bumper cover - SOLD
front bumper cover from a '79(no rips or tears) - $40
79-89 mustang fenders clean! - $80/pr or $45/ea
rear bumper cover 85/86 no tears - $20
99-04 rocker panel molding competition orange(no clue which side) - $20
99-04 roof/door trim comp orange(again no clue which side) - $10
fox hatch lift support shock thingys - $20/pr

SUSPENSION/BRAKES:
5-speed pedals from 86 GT - $60
steering column and key from 86 GT - $40
86 GT steering wheel - $60
8.8" fox rear from 86 GT - $150

INTERIOR:
87-93 opal grey manual windows door panels - $40/pr
87-93 faded titanium grey coupe rear quarter panels - SOLD
79-86 black a-pillars - $30/pr
79-86 rear coupe black quarter panels - $80/pr
red rear seat from 86 GT - $30(upper and lower)
red rear seatbelts - $20/set

MISC:
Craftsman detail sander - $10
Universal seat slider brackets - $15/pr
'86 washerfluid tank(no leaks!) - $5
plastic nitrous bottle brackets - $10
8-gal fuel tank came from '80 coupe to put in the bigger EFI tank. comes with straps, cover, fuel sending unit and pickup. WILL require custom straps or modifications to existing ones. - $20
Jegs fuel sump - $35
rxracer
10-13-2009, 09:39 AM
https://m.ebay.com/Member/Selling.aspx?pix=1&emvcc=0
rxracer
10-15-2009, 05:39 PM
list updated
REX331
10-15-2009, 05:45 PM
I need the passenger fender. Are you gonna be at the NMRA race?

Rex
rxracer
10-15-2009, 06:16 PM
I need the passenger fender. Are you gonna be at the NMRA race?

Rex

No, I wont. I dont get out much with 4 kids now. LOL!
red95gts
10-15-2009, 07:33 PM
You still got those 95 spindles or are they gone?
rxracer
10-15-2009, 07:38 PM
they're gone, D. but FWIW, pick-a-part behind Fry's has a pair.
Otis!
10-15-2009, 07:45 PM
Jason,

If you can get the fender to me, I'll trade Rex for an engine dolly... :D

(I plan on going to the NMRA at least one day)

O!
red95gts
10-15-2009, 08:03 PM
they're gone, D. but FWIW, pick-a-part behind Fry's has a pair.

You happen to know how much they want for them? Last time I was there, the prices seemed pretty spendy for pull-it-yourself junkyard parts.

I could care less about the hubs as I'll replace those anyway...
rxracer
10-15-2009, 09:39 PM
You happen to know how much they want for them? Last time I was there, the prices seemed pretty spendy for pull-it-yourself junkyard parts.

I could care less about the hubs as I'll replace those anyway...

No, i didnt check on a price. Just noticed a pair when i was there about 2 weeks ago.
REX331
10-15-2009, 09:44 PM
Jason,

If you can get the fender to me, I'll trade Rex for an engine dolly... :D

(I plan on going to the NMRA at least one day)

O!

LOL Otis, I have been trying to get up with ya to give it to ya. I have two and dont remember which is your and which is mine. They look the same. Does it matter which ya get or do I need to bring both.
trbstang
10-16-2009, 01:36 AM
You happen to know how much they want for them? Last time I was there, the prices seemed pretty spendy for pull-it-yourself junkyard parts.

I could care less about the hubs as I'll replace those anyway...

I've passed on a few pairs there. IMO not worth it pulling them yourself for the price they were asking a couple of years ago (I think it was like $40 each or so plus core) I've gotten many pairs off car-part.com for the same price or less, pulled and ready to go. I see Manuels in Pasadena has a set for $40 each.
rxracer
10-22-2009, 08:59 PM
list updated
Chuck98GT
10-23-2009, 11:47 AM
Still have the Holcomb steel seat bracket(fits 79-04 mustang w/ race buckets) - $25?


Anyone have stock v8 rear springs?
rxracer
10-23-2009, 12:16 PM
Chuck, I just shipped off the Holcomb bracket. I don't have a pair of rear springs.
rxracer
11-10-2009, 07:01 AM
ttt!
rxracer
12-11-2009, 05:03 PM
bumpz