PDA

View Full Version : Anyone ever notice this NHRA Rule...


REX331
12-14-2008, 09:20 AM
If the roll bar or cage is mounted to a 6x6 plate then it must sandwich the floor pan with another 6x6 plate on the bottom bolted together with 4 3/8 inch bolts.

Rex
Timebomb
12-14-2008, 09:41 AM
That is only if the rollbar is removable from the car. If its welded to the unibody then you are good to go. Full Body cars with a seperate frame are completely different and require the bar to tie back into the frame.
REX331
12-14-2008, 11:11 AM
Ok thanks Brent. Misread the rules. Went back and read them again.

Rex