AEkrot
09-07-2002, 09:58 AM
Billet steel cam for SB Ford - never used or installed*
custom Blower/NOS grind for ~350 CID
by D. Elgin Cams (650) 364-2187 www.elgincams.com
Intake opens 29 BTDC
Exhaust closes 27 ATDC
Intake Centerline 112 (+4 adv)
Exhaust opens 79 BBDC
Intake closes 65 ABDC
Advertized Duration 318/328 (0 lash/lift)
Duration @ .050” lift/proper lash 274/286
Lift Lobe Valve Lash
Int .450 .694 .026
Ex .425 .688 .022
Includes a slightly used FMS billet timing gear/double roller chain set
$150 cash
*this cam has been reground - all lobes verified correct on using Cam Pro - this cam has the usual stepped cam bearing journal diameters - I decided to go with needle cam bearings which requires a different cam core so I've never used this cam.
custom Blower/NOS grind for ~350 CID
by D. Elgin Cams (650) 364-2187 www.elgincams.com
Intake opens 29 BTDC
Exhaust closes 27 ATDC
Intake Centerline 112 (+4 adv)
Exhaust opens 79 BBDC
Intake closes 65 ABDC
Advertized Duration 318/328 (0 lash/lift)
Duration @ .050” lift/proper lash 274/286
Lift Lobe Valve Lash
Int .450 .694 .026
Ex .425 .688 .022
Includes a slightly used FMS billet timing gear/double roller chain set
$150 cash
*this cam has been reground - all lobes verified correct on using Cam Pro - this cam has the usual stepped cam bearing journal diameters - I decided to go with needle cam bearings which requires a different cam core so I've never used this cam.